Gas Cutting Products

King Regulator Series (Two-Stage) Gas Regulators
KING REGULATOR SERIES (TWO-STAGE) GAS REGULATORS has a forged brass bonnet in first stage and a die-cast special alloy bonnet in second stage for higher strength. Stainless steel diaphragm in first stage absorbs the shock of inlet pressure up to 230 bar and flexible profile rubber diaphragm in second stage offers fine gas control.
- Stainless steel diaphragm in first stage to absorb shock of inlet pressure up to 230 bar. Flexible rubber diaphragm in second stage for fine gas control.
- Forged brass bonnet in first stage and die cast special alloy bonnet in second stage for higher strength.
- Teflon moulded valve and stainless steel spindle in the valve assembly capsule in both stages for leak proof performance.
- Uniquepressuregauge & pressure adjustingknobs.
- Second stage plenum chamber volume is six times than first stage ensuring very stable flow characteristics.
- Double protection through separate safety valves in both first and second stage.
- Triple filter: one in inlet and two wire mesh in the valve assembly protect the sensitive internal parts from any dust particles. Weight 2.40 Kg.

King Regulator Series (Single-Stage) Gas Regulators
KING REGULATOR SERIES (SINGLE-STAGE) GAS REGULATORS has an unbreakable, moulded pressure adjusting knob and a unique profile rubber diaphragm which reduces the pressure from 200 bar to 10 bar in a single stage.
- Unbreakable moulded pressure adjusting knob.
- Unique profile rubber diaphragm.
- Stainless steel machined & ground valve spindle with Teflon moulded valve at the heart of the regulator.
- Sintered filter in the inlet, wire mesh filter in valve assembly.
- Side inlet for horizontal cylinder valve.
- Self-adjusting safety valve.
- Weight 1.10 Kg approx.
- CO & Argon Regulators with outlet flow-gauge 2 design. Hence no additional flow-meter is required.

King Protect R- Flashback Arrestor For Regulator
King Protect – R is a regulator-mounted flashback arrester which prevents backfire at regulator end. Spring loaded non-return valve, a large surface area flame arrester and a temperature sensitive cut-off valve ensure total safety.
- A large surface area flame arrestor of stainless steel construction extinguishes any dangerous flashback entering the device in any direction
- A temperature sensitive cut-off valve extinguishes sustained flashbacks long before the internal temperature of the arrestors reaches a dangerous level.
- A spring loaded non-return valve prevents slow or sudden reverse gas flow forming explosive mixtures in the gas supply.
- A filter at the gas inlet protects the arrestor against dirt contamination, extending the service life.

King Protect- Flashback Arrestor For Torch
King Protect – T is a torch-mounted flashback arrester which prevents backfiring at torch end. Spring-loaded non-return valve combined with a large surface area flame arrester ensure total safety.
- The flashback arrestors are installed at the inlet of the blowpipe.
- A large surface area flame arrestor constructed of stainless steel extinguishes any dangerous flashbacks entering the device from any direction.
- A spring loaded non-return valve prevents slow or sudden reverse gas flow which could form explosive mixtures in the gas supply.
- A filter at the gas inlet protects the arrestor against dirt contamination, extending the service life.

King Regulator Series
King Regulator Series has a range of single and double stage regulators for medium and heavy-duty work. Forged body bonnet can withstand high pressure and ensure leak proof performance.
- Stainless steel diaphragm in first stage to absorb shock of inlet pressure up to 230 bar. Flexible rubber diaphragm in second stage for fine gas control.
- Forged brass bonnet in first stage and die cast special alloy bonnet in second stage for higher strength.
- Teflon moulded valve and stainless steel spindle in the valve assembly capsule in both stages for leak proof performance.
- Unique pressure gauge & pressure adjusting knobs.
- Second stage plenum chamber volume is six times than first stage ensuring very stable flow characteristics.
- Double protection through separate safety valves in both first and second stage.
- Triple filter: one in inlet and two wire mesh in the valve assembly protect the sensitive internal parts from any dust particles. Weight 2.40 Kg.
- 3 Argon Gas Regulators with outlet flow-gauge design indicating gas flow in LPM and Ft /Hr. as measuring units as seen in gas flowmeter, hence no additional flow-meter required.
- Argon is a shielding Gas while others gases such as Oxy / Acetylene/ LPG are being used for Oxy-fuel cutting application and Nitrogen in High definition Plasma Cutting, are high pressure compressed gases.

King Torch- NM
King Torch NM is a gas cutting torch which uses Nozzles Mix technology for enhanced safety. Its all-metal design makes KING Torch NM is a rugged torch that can withstand rough shop floor work conditions.
- King Cutting Torch has several advantages owing to its nozzle mix system. King Cutting Torch is available with ANM nozzle for use with Acetylene as fuel gas and PNM nozzle for use with LPG as fuel gas.
- NOZZLE–MIX CUTTING IS SAFEST: King Cutting Torches unique “positivesuction” NM nozzles are designed according to the fuel gas being used, to safeguard the torch and operator from “sustained backfire” or “flashback”. This is especially advantageous when different fuel gases are used on the same shopfloor. WIDER RANGE OF OPERATION: King Cutting Torches can be employed for a wide range of cutting jobs. All you need is to change the nozzle to suit the job.
- EASY MAINTENANCE: The all metal design makes KING NM a rugged torch that can withstand rough handling by shopfloor workers.

King Join- AGWT/ Ht-1
KING JOIN – AGHT / HT-1 is a heating torch which offers dependable and safe performance, using Oxygen and LPG for heating applications.
- Torch designed to use with LPG gas.
- Torch is designed with safety purpose to give dependable performance.
- 3 sizes of heating nozzles are provided with this torch.

King Join- AGWT / 25W
King Join – AGWT / 25W is a well-balanced blowpipe for heavy duty welding and brazing applications (0.8mm – 6mm thick plates) using Oxygen and Acetylene. This torch is designed with safety protections to offer dependable performance, without any backfiring.
- This is a well balanced blowpipe for versatile applications using Oxygen & Acetylene / LPG gases.
- Best suitable for gas welding / brazing from 0.5 mm to 3mm thick plates.
- Torch is designed with safety protections to give dependable performance against backfire.
- One Oxy-Acetylene tip is supplied as a standard scope along with torch for gas welding / brazing applications. Oxy-Acetylene & Oxy-LPG tips are optional.
- Torch can be used with both Oxy-LPG as well as
- Oxy-Acetylene gases.

Panther Nm
- No backfire during cutting because of “Nozzle Mix” technology.
- Aluminium die cast body with ventilation holes reduces overheating of motor and other electrical parts.
- Unbreakable, smooth and precise horizontal and vertical adjustment of torch.
- Bevel setting with locking facility means bevel accuracy during long cutting.
- Remote mounted gas control knobs make flame adjustment during cutting operation easy.
- Single lever ON-OFF control for cutting Oxygen makes the stopping and restarting of cutting very easy and saves Oxygen.
- Stainless steel heat reflectors (2 nos. with air gap), protect the motor from heat during cutting thus adding to the life of the machine
- Travels on standard 1.8 mtr extruded Aluminum rail.

King Join- AGWT / 3W
King Join – AGWT / 3W is a well-balanced blowpipe for welding and brazing applications (0.5mm – 3mm thick plates) using Oxygen and Acetylene/LPG. This torch is designed with safety protections to offer dependable performance, without any backfiring.
• This is a well balanced blowpipe for versatile
applications using Oxygen & Acetylene / LPG gases.
• Best suitable for gas welding / brazing from 0.5 mm
to 3mm thick plates.
• Torch is designed with safety protections to give
dependable performance against backfire.
• One Oxy-Acetylene tip is supplied as a standard
scope along with torch for gas welding / brazing
applications. Oxy-Acetylene & Oxy-LPG tips are
optional.
• Torch can be used with both Oxy-LPG as well as
Oxy-Acetylene gases.

Kingcut Edge
- The machine is an economic machine suitable for oxyfuel cutting and Air Plasma.
- Dual drive mechanism with linear guide ways.
- The machine is Ergonomically designed.
- 15 inch high brightness LCD with all standard Menu
- The machine has the option of Automatic Torch Ignition for Oxyfuel cutting
- The machine has both automatic and manual torch height control option.
- Can be used with upto 2 torches as standard. (1 Plasma +1 Oxyfuel or 2 Oxyfuel)

King Cut Pro
Phantom provides an extremely user-friendly machine interface. The wide viewing angle and high resolution graphics generate a bright display even in the harshest shop floor environment, allowing operators to easily and effectively move through the menus and Touch Screen Interactive Display.
- Bright Touch Screen Interface
With a 10.4 in. (264 mm) industrial-grade touch screen, the Phantom provides
an extremely user-friendly machine interface. The wide viewing angle and high
resolution graphics generate a bright display even in the harshest shop floor
environment, allowing operators to easily and effectively move through the menus and
Touch Screen Interactive Display - Eliminate dry runs and confirm the part program before cutting them with the Phantom
full color graphic display. View the cut path in real-time and monitor cut progress –
especially important with underwater plasma. Use the zoom tools to verify part spacing
and eliminate wasted or unusable product. - Expandable Shape Library
- True Multi-tasking Environment
- Increase operator productivity by performing many different tasks within the Windows®
XP Embedded environment. Load a new part program, create or edit a part program,
choose a new part program from the shape library, create or edit a program nest, check
production messeges, fill out productivity sheets or monitor consumables life – all at the
same time and all while the machine is cutting!
Fast DXF File Conversion - Go To (Job Interrupt)
Interrupt the current cutting routine to cut a new part, move ahead multiple pierce points,
recover from cut loss, recover from power loss, change torch consumables, interrupt a
long nest, jump to the end of a part or nest or reverse the cutting path – all quickly done
at the touch of a button without losing machine position and without scrapping valuable
material. - Quick Plate Alignment
- Monitor and Track Consumables
guidethe cutting machine. - Commonly used standard shapes can be designed right at the control. Touch the screen
to input the required dimensions and follow a simple logical prompting process. Shapes
are graphically displayed with dimension lines to assist the numeric entry process. A
dynamic display draws the shape, which reduces guesswork. Now even complex shapes
can be made consistently and accurately.
The Phantom accepts direct downloads of CAD/CAM DXF files, which reduces the
expense of third-party post processing software. Furthermore, the Phantom can
automatically assign Lead In/Lead Out positions – or the operator can make these
assignments manually. - Quickly compensate for a plate that is not aligned properly on the machine. The
Phantom rotates the part program for the proper placement on the true plate position.
With a few simple screen prompts, the Phantom rotates the part program for the proper
alignment with the plate. Virtually drop the plate and cut. This saves material and
wasted time moving the plate into the correct cutting position.
The Phantom tracks torch consumable usage and can alert the operator when a
consumable change is required. This feature will maximize consumable life and torch
life. In addition, cut quality and part accuracy can be held to the highest levels.