Automelt S33

• Agglomerated Flux
• Fluoride-Basic Type Flux
• High Basic Flux having Basicity Index of 3.1
• Neutral Behaviour to Carbon, so Low C weld metal is produced with Low C Wire
• Non-Chromium Compensating
• Chromium Burnout is very less
• Multi-pass Butt and Fillet Welding
• For Stainless Steels
• Suitable for Welding Speeds of 0.40 – 0.60 m/min
• Grain Size – 0.25-1.60mm
• Type of Current – DCEP

Automelt B41

Automelt B20 PLUS

• Agglomerated Flux
• Fluoride-Basic Type Flux
• High Basic Flux having Basicity Index of 3.1
• Neutral behaviour to acvity
• Mul-pass Bu and Fillet Welding
• For Carbon & Low Alloy Steels
• Suitable for Narrow Gap Welding
• Suitable for Single & Mul Wire Tandem System
• Suitable for Welding Speeds of 0.40 – 0.60 m/min
• Grain Size – 0.25-1.60 mm
• Type of Current – DCEP / AC
• Wall Neutrality Number with EM12K is 23

Automelt B22 PLUS

• Agglomerated Flux
• Fluoride-Basic Type Flux
• Basic Flux having Basicity Index of 1.8
• Neutral behaviour to acvity
• Multi-pass Butt and Fillet Welding
• For Carbon & Low Alloy Steels
• Suitable for Single Wire and Multiple wire tandem System
• Suitable for Welding Speeds of 0.40-0.60 m/min
• Grain Size – 0.25-1.60 mm
• Type of Current – DCEP / AC
• Wall Neutrality Number with EH12K Wire is 23

Automelt B71

• Agglomerated Flux
• Fluoride-Basic Type Flux
• Basic Flux having Basicity Index of 1.6
• Multi-pass Butt and Fillet Welding including “two-run” technique
• For Carbon & Low Alloy Steels
• Suitable for Narrow Gap Welding
• Suitable for Single & Multi Wire twin and Tandem System
• Suitable for Welding Speeds of 0.35-0.70 m/min
• Grain Size – 0.25-1.60 mm
• Type of Current – DCEP / AC
• Wall Neutrality Number with EM12K Wire is 12

Automelt B31 (Automelt Gr IV)

• Agglomerated Flux
• Fluoride-Basic Type Flux
• Basic Flux having Basicity Index of 1.6
• Neutral behaviour to acvity
• Multi-pass Butt and Fillet Welding
• For Carbon Manganese Steels
• Suitable for Single Wire System
• Suitable for Welding Speeds of 0.40 – 0.60 m/min
• Grain Size – 0.25-2.00 mm
• Type of Current – DCEP
• Wall Neutrality Number with EH14 Wire is 7

Automelt A 81

• Agglomerated Flux
• Aluminate- Rutile Type Flux
• Acidic Flux having Basicity Index of 0.6
• Active Flux with moderate Si and Mn pick-up
• For Single and Multi-pass Butt and fillet welding at high speeds
• For C-Mn & Low Alloy Steels
• Suitable for Single and Mul-Wire, twin wire system
• Suitable for Welding Speeds of 0.40-1.20 m/min
• Grain Size – 0.25-1.60 mm
• Type of Current – DCEP / AC 1000A
• Wall Neutrality Number with EM12K Wire is 56

Automelt A57

• Agglomerated Flux
• Aluminate-Rule Type Flux
• Acidic Flux having Basicity Index of 0.5
• Acve Flux with moderate Si and Mn pick-up
• For Single and Multi-pass Butt and fillet welding (With EM12K Wire restrict to 15 mm thickness for mul-pass)
• For Carbon Steels
• Suitable for Single Wire System & thin wire SAW
• Suitable for Welding Speeds of 0.20-0.75 m/min
• Grain Size – 0.25-1.60 mm
• Type of Current – DCEP 800A
• Wall Neutrality Number with EL8 Wire is 60

Automelt A55 (Automelt Gr II)

• Agglomerated Flux
• Aluminate- Rutile Type Flux
• Acidic Flux having Basicity Index of 0.6
• Active Flux with moderate Si and Mn pick-up
• For Single and Multi-pass Butt and fillet welding (With EM12K Wire restrict to 15 mm thickness for mul-pass)
• For Carbon Steels
• Suitable for Single Wire & Tandem System
• Suitable for Welding Speeds of 0.35-0.60 m/min
• Grain Size – 0.25-2.00 mm
• Type of Current – DCEP / AC 800A
• Wall Neutrality Number with EL8 Wire is 56

Automelt S76

• Agglomerated Flux
• Fluoride-Basic Type Flux
• Neutral Flux having Basicity Index of 1.2
• It compensates Chromium to counteract arc loss
• For Cladding of Stainless Steels
• Suitable for Welding Speeds of 0.40-0.60 m/min
• Grain Size – 0.25-1.60 mm
• Type of Current – DCEP / DCEN