MIG Equipment (CV)

Ranger 600
Ranger 600
  • Most reliable and dependable thyristor based power source for high quality MIG / MAG semi automatic manual and semiautomatic mechanized welding applications.
  • Hex phase, full wave full control bridge rectification circuit reduces ripple in the welding output – resulting in spatter free welding.
  • Special design and construction of Transformer – resulting faster response time and excellent Arc dynamics
  • Light weight, Compact design of power source, wire feeder and Torch
  • Adjustment of Crater Voltage, Crater Current possible with regulating pots provided on the front panel
  • Globule detach technique keeps the tip ready for next welding cycle
  • Choice of different types of wire feeder motors and welding torches available for different industrial applications
  • Quick release wire feed roller mechanism enables operator to change the wire spool quickly, minimizing the unproductive time and thus increasing the productivity on the shop floor
  • Power source protected from Over Voltage, Under Voltage supply, Single phasing, Over load / overheating and very high secondary short circuit current
  • Suitable for ALL position MIG / MAG welding applications -both within shop-floor as well as at open yards and project sites (with due protection or shield against windy air)
  • Suitable for wide range of metals like Carbon Steel, Stainless Steel, Aluminium and its alloys, with appropriate or recommended consumable
  • Specifically designed for heavy duty, structural welding, machine building applications
View Product
Champmig 250
Champmig 250
  • Latest Inverter based technology.
  • Low Power Consumption due to Power Factor Correction Technique that brings the Power Factor nearly equal to one.
  • Single point controlled synergic MIG welding operation.
  • 3-digit Digital Panel Meters to display the set voltage, actual voltage, set current and actual current while welding.
  • LED Indications for Mains ON and Trip signal.
  • Protections: Over-Voltage, Under -Voltage, Over Temperature & Output Short Circuit Protection.
  • Compact Design with built-in Wire feeder.
  • Gas Trolley for easy movement of machine on the shop floor.
View Product
Maximig 400
Maximig 400
  • Most reliable and dependable workhorse MIG / MAG welding machines proven for wide range of applications
  • Rugged design, reliable performance and superior arc characteristics – minimum maintenance requirements
  • Diode based power source with traditional tapped transformer, provided with switch on front panel for step control of voltage enabling welder to obtain the desired arc voltage with ease
  • User friendly selection of 2track / 4track operation for zero defect GMAW welding
  • Good and consistent weld quality with low hydrogen content
  • Dependable Thyristorized wire feeder system ensures long, uninterrupted welding
  • Quick release wire feed roller mechanism enables operator to change the wire spool quickly, minimizing the unproductive time and thus increasing the productivity on the shop floor
  • Recommended for All position MIG / MAG welding applications Suitable for wide range of metals like Carbon
  • Steel, Stainless Steel, with appropriate or recommended consumable
  • Ideally recommended for heavy duty MIG / MAGwelding applications like crane structure components manufacturing, 3 shift use, rough handling on the shop-floor and fabrication shops where maintenance staff is not very qualified
View Product
Maxmig 251
Maxmig 251
  • Most reliable and dependable workhorse MIG Welder, Welding machines with a proven economy
  • this MIG Welder Welding Machine has a Rugged design, reliable performance and superior arc characteristics
  • A diode based power source with traditional tapped transformer, provided with switch on front panel for step control of voltage, enabling welder to obtain the desired arc voltage with ease
  • User friendly selection of 2 track / 4track operation for zero defect GMAW welding
  • Good and consistent weld quality with low hydrogen content
  • MAXMIG-251 MIG Welder Welding machine is Dependable Thyristorized wire-feeder system ensures long, uninterrupted welding Quick release wire feed roller mechanism enables an operator to change the wire spool quickly,
  • minimizing the unproductive time and thus increasing the productivity on the shop floor
  • Standard Package comprises of Power Source, Wire feeder (2 Roll Drive) with 5-meter interconnection and Welding Torch only
  • Recommended for All position MIG / MAG welding applications MIG Welder Welding Machine.
  • Suitable for welding of a wide range of metals like Carbon Steel, Stainless Steel, and other steel alloys, with appropriate or recommended consumable
  • High volume thin sheet metal fabrication welding as in Auto Industries and other engineering industries, maintenance and repair workshops
  • Most ideal for Auto Ancillary units – for increased productivity and quality welding applications
View Product
Striker 400
Striker 400
  • Light weight, Compact design of Power source, Wire feeder and Torch
  • Crater Voltage and Current control possible with ON/OFF switch
  • LED Indications for Mains ON and Trip signal
  • Globule Detachment Technique keeps the tip ready without globule formation for next welding cycle
  • Protection against overheating and very high secondary short circuit current
  • Flux core or solid wire selection switch and Gas check Toggle switch on front panel
  • Special construction of transformer – resulting in fasterresponse time andExcellentArcdynamics
  • Digital voltage and current meters on front panel
  • • Wheels for easy movement of machine on the shop floor
View Product
Champmig 600
Champmig 600
  • Inverter based digitally controlled GMAW outfit
  • Auto “Weld Stop” when welding torch is taken away from weld job
  • Digital Panel for adjusting the welding
  • 25% more Energy efficient than conventional machines.
  • Maximum Power factor is 0.95
  • Excellent dynamic response enables superior arc characteristics. 2T, 4T operating modes
  • Dynamic Inductance adjustment for better arc control
  • Crater voltage and Crater current adjustment through digital panel. Unique feature of Pinch off pulse to avoid globule formation.
  • Automatic “Weld Stop” facility.
  • Normal/ Creep feeding selection available on on front panel.
View Product
Champmig 400
Champmig 400
  • Digital Panel for adjusting the welding.
  • 25% more Energy efficient than conventional machines.
  • Maximum Power factor is 0.95.
  • Excellent dynamic response enables superior arc characteristics.
  • 2T, 4T operating modes.
  • Dynamic Inductance adjustment for better arc control.
  • Crater voltage and Crater current adjustment through digital panel.
  • Unique feature of Pinch-off pulse to avoid globule formation.
  • Automatic “Weld Stop” facility.
  • Normal/ Creep feeding selection available on front panel.
View Product
Champmig 300
Champmig 300
View Product
Champmig 400 CC/CV
Champmig 400 CC/CV
  • High efficiency and high Power factor mul process DC Welder.
  • User friendly Digital front panel and remote controller for MMA welding.
  • Crater voltage, Crater current & Inductance adjustment on front panel for MIG/MAG welding
  • Start and Arc Force adjustment on panel for MMA welding.
  • Crater ON (4T) and Crater OFF (2T) mode of operaon.
  • Gas check switch on front panel.
  • Wire speed and Voltage seng remotely from wire feeder.
  • Complies to IEC 60974-1 Standard.
View Product